How to Clean a Washer Pump Filter
If your washer is draining slowly, leaving water in the drum, or showing a drain error, the pump filter is often the first place to check.
Learning how to clean washer pump filter parts correctly can restore performance and help prevent odor, clogs, and costly service calls.
What a washer pump filter does
The pump filter catches lint, coins, buttons, hair, pet fur, and other debris before it reaches the drain pump.
In many front-load washers, it is a serviceable filter designed to protect the pump impeller and keep water moving out of the machine.
In some top-load washers, the filter may be less obvious or combined with a self-cleaning drain system, but debris can still collect in accessible traps, hoses, or pump housing areas.
Checking the owner’s manual is the safest way to identify the exact design for your model.
Signs the washer pump filter needs cleaning
A clogged filter usually affects drainage first, but it can also create secondary problems throughout the wash cycle.
Watch for these common symptoms:
- Water remains in the drum after a cycle
- Clothes come out wetter than usual after spin
- The washer displays drain or pump error codes
- The machine makes a humming or buzzing sound during drain
- Odors develop from trapped debris and stagnant water
- Wash cycles take longer than normal
If these issues appear repeatedly, cleaning the pump filter is a practical first troubleshooting step before replacing parts.
Before you start: safety and supplies
Cleaning the filter is simple, but it should be done carefully because trapped water can spill out quickly.
Before opening any access panel, unplug the washer and shut off the water supply if needed.
Gather these supplies
- Shallow pan, baking tray, or towel
- Small bucket for drained water
- Old towels or absorbent rags
- Gloves
- Flashlight
- Soft brush or cloth
For front-load machines, a low container is especially useful because the pump housing often holds several cups of water even when the drum looks empty.
How to clean washer pump filter on a front-load washer
Most front-load washers have a small access door near the bottom front of the unit.
Behind that panel is typically the drain pump filter, sometimes called a coin trap or pump cleanout.
Step 1: Power down the washer
Unplug the machine from the wall outlet.
If the washer is hardwired or the outlet is inaccessible, switch off the circuit breaker instead.
Step 2: Locate the access panel
Open the small panel at the lower front of the washer.
Some models use a hinged door, while others have a removable kick plate.
Check the manual if you do not see an obvious panel.
Step 3: Drain the residual water
Place towels and a shallow pan under the opening.
Many washers include a small drain hose next to the filter cap; if yours does, remove the hose plug and let water flow slowly into the container before opening the main filter.
If there is no drain hose, loosen the filter cap gradually to control the water release.
Open it only partway at first, then pause as water drains out.
Step 4: Remove the filter
Once the water has drained, turn the filter cap counterclockwise and pull it out.
Expect lint, hair, fabric threads, and small objects such as buttons or coins to appear.
Step 5: Clean the filter thoroughly
Rinse the filter under warm water and remove stuck debris with your fingers or a soft brush.
Wipe the housing opening with a damp cloth and check for buildup around the seal, threads, and impeller area.
Do not use sharp tools that can damage the plastic or puncture the seal.
If debris is packed deeper in the housing, gently remove it without forcing anything into the pump mechanism.
Step 6: Inspect the pump area
Use a flashlight to look inside the opening.
You should see the impeller area, which may move slightly.
If an object is lodged in the pump blades, remove it carefully if it is reachable without disassembly.
Step 7: Reinstall the filter
Thread the filter back in clockwise until it is snug.
Do not overtighten, because that can damage the threads or make future cleaning harder.
Step 8: Test the washer
Run a short rinse and drain cycle or a small load to check for leaks and confirm proper draining.
Reopen the panel if necessary and verify that the filter is seated correctly.
How to clean washer pump filter on a top-load washer
Top-load washers vary widely by brand and design, so the filter may be in a different location or not user-accessible at all.
Some models use a removable lint screen inside the agitator, a drain trap near the pump, or a self-cleaning system that still benefits from periodic maintenance.
- Check the owner’s manual for the exact filter location
- Inspect any removable lint screens or trap doors
- Look for drain pump access beneath the rear panel only if the manufacturer allows it
- Clear visible lint, coins, and debris from accessible traps or screens
If the washer has no serviceable pump filter, focus on cleaning the tub, dispensers, hoses, and lint screens to reduce debris entering the drain system.
How often should you clean the pump filter?
For most households, cleaning the filter every 1 to 3 months is a practical schedule.
Homes with pets, heavy laundry use, work clothes, or frequent small items in pockets may need more frequent cleaning.
If you notice slow draining, musty odors, or repeated pump-related error codes, clean the filter immediately rather than waiting for the next maintenance interval.
Common mistakes to avoid
Small errors can turn a simple maintenance task into a leak or damage issue.
Avoid these common mistakes when learning how to clean washer pump filter components:
- Opening the filter without towels or a drain pan in place
- Forcing the cap if it resists turning
- Reinstalling the filter with dirt on the threads or seal
- Using tools that scratch or crack the filter
- Ignoring foreign objects that may block the impeller
- Skipping the test cycle after cleaning
If the filter remains difficult to remove, consult the manual rather than applying excessive force.
When cleaning the filter is not enough
If the washer still will not drain after the filter is clean, the problem may be deeper in the system.
Possible causes include a clogged drain hose, a blocked standpipe, a faulty drain pump, a damaged lid switch, or an electronic control issue.
Persistent grinding noises, burning smells, repeated error codes, or visible leaks may require appliance repair service.
If the impeller does not move, or if the pump housing appears cracked, replacement may be necessary.
How to keep the washer pump filter cleaner longer
Good laundry habits reduce buildup and make the filter easier to maintain over time.
- Empty pockets before washing
- Use mesh bags for small items
- Shake out pet hair and debris from clothing
- Avoid overloading the machine
- Use the correct amount of detergent
- Run periodic hot maintenance cycles if the manufacturer recommends them
These habits help lower lint accumulation, reduce strain on the drain pump, and keep the washer operating more efficiently between cleanings.
Frequently asked questions about washer pump filters
Can I clean the filter while the washer is full of water?
No.
Always stop the cycle, disconnect power, and drain as much water as possible before opening the filter.
Otherwise, water can spill quickly and create a mess or electrical hazard.
What if my washer has no visible filter?
Some machines use internal or self-cleaning systems.
If you cannot find an access panel or lint trap, check the manual or the manufacturer’s support site for your exact model.
Does cleaning the pump filter fix all drainage problems?
No, but it solves a large share of common drainage complaints.
If the filter is clean and the washer still struggles to drain, the hose, pump, or control system may need further inspection.