How to Clean a High Efficiency Washing Machine: A Practical 2026 Guide

How to Clean a High Efficiency Washing Machine

A high efficiency washer uses less water and detergent than a traditional top-load machine, which makes regular cleaning essential.

If your HE washer smells musty, leaves residue on clothes, or has visible buildup, the problem is usually maintenance, not the machine itself.

Knowing how to clean a high efficiency washing machine can improve wash performance, reduce odors, and help extend the life of the appliance.

The process is simple, but the details matter because HE washers have parts and habits that trap moisture more easily than older models.

Why HE washers need regular cleaning

High efficiency washing machines rely on low-water wash cycles, tightly sealed doors or lids, and detergent formulated for low-suds use.

Those same features can create conditions where soap scum, lint, hard-water minerals, and mildew collect in hidden areas.

  • Low water levels can leave detergent residue behind.
  • Rubber door gaskets or tub seals can hold moisture.
  • Detergent drawers often collect sludge and clumps.
  • Drain pumps and filters may trap debris, coins, and fabric fibers.

Cleaning the washer on a regular schedule helps prevent unpleasant odors from spreading to clean laundry.

It also supports better drainage and more consistent rinse performance.

What you need before you start

Most HE washer cleaning tasks can be done with basic household supplies.

Avoid using harsh abrasives or products not recommended by the manufacturer, especially if your machine has stainless steel parts or specialty coatings.

  • Microfiber cloths or soft cleaning rags
  • Warm water
  • Mild dish soap
  • White vinegar, if allowed by the manufacturer
  • Baking soda, for odor control and light scrubbing
  • Soft brush or old toothbrush
  • Small towel for drying seals and edges

Check the owner’s manual before using vinegar, bleach, or specialty cleaners.

Some brands, including Whirlpool, LG, Samsung, GE, Maytag, and Electrolux, provide specific cleaning recommendations that can differ by model.

How to clean the washer drum

The drum is the easiest place to start because it handles the bulk of the soil load.

A clean tub helps remove odors and residue that can transfer back onto clothing.

Use the machine’s clean cycle

Many modern HE washers include a Tub Clean, Clean Washer, or Self Clean cycle.

Run this cycle according to the manufacturer’s instructions, usually with an empty drum.

  • Add a washer cleaner tablet or the recommended cleaning agent.
  • Run the hottest water setting allowed for that cycle.
  • Leave the door or lid open afterward to allow drying.

If your washer has a dedicated cleaning cycle, use it monthly or as recommended.

This is one of the most effective ways to remove buildup from the drum, hoses, and internal surfaces.

Clean the drum manually

If your machine does not have a cleaning cycle, wipe the inside of the drum with a cloth dampened in warm water and mild soap.

For stubborn spots, use a paste made from baking soda and water, then rinse thoroughly.

Be careful not to leave any cleaning residue behind.

Residual cleaner can create extra suds in later loads and may affect rinse quality.

How to clean the gasket, seal, and door area

The gasket is one of the most common sources of odor in front-load HE washers.

It folds and collects standing water, lint, hair, and detergent film.

  • Pull back the rubber gasket gently.
  • Inspect for trapped debris, coins, and lint.
  • Wipe the entire seal with a damp cloth and mild soap.
  • Dry the gasket fully with a clean towel.

If you notice mildew spots, use a manufacturer-approved cleaner or a diluted cleaning solution recommended for the surface.

Always follow with a rinse and dry step to reduce lingering moisture.

Also wipe the inside of the door, the glass or plastic window, and the door frame.

These areas often collect soap splatter and fingerprints that eventually attract grime.

How to clean the detergent dispenser

Detergent drawers and dispenser trays often develop a sticky layer from liquid detergent, softener, and powder residue.

This buildup can block proper dispensing and cause poor wash results.

  • Remove the dispenser drawer if it is designed to come out.
  • Soak removable parts in warm water with mild soap.
  • Scrub small openings and corners with a soft brush.
  • Wipe the dispenser housing inside the machine.
  • Dry everything before reinstalling.

If you use fabric softener regularly, clean the dispenser more often because softener can become gummy and hard to remove.

How to clean the drain filter and pump trap

Some HE washers, especially front-load models, include a drain filter or pump trap that catches lint, buttons, and small debris.

When this filter becomes clogged, the washer may drain slowly, leave water in the drum, or emit a sour smell.

Before opening the filter, place a shallow pan or towel underneath to catch any remaining water.

Turn off the machine, remove the access panel if needed, and clean the filter according to the user manual.

  • Remove visible debris by hand.
  • Rinse the filter under warm water.
  • Check the housing for slime, lint, or small objects.
  • Reinstall the filter securely before running the washer again.

If your washer does not have a user-accessible filter, refer to the model guide.

Some systems are self-cleaning, while others require professional service.

How to clean the exterior and control panel

The outside of the washer may not affect performance directly, but regular cleaning helps prevent dust, detergent drips, and grime from building up around buttons and seams.

  • Use a soft cloth lightly dampened with water.
  • Add a small amount of mild soap if needed.
  • Wipe the control panel gently to avoid forcing moisture into buttons.
  • Dry the surface with a second clean cloth.

Avoid spraying cleaner directly onto the panel.

Spray onto the cloth instead, especially around digital displays, knobs, and touch controls.

How often should you clean a high efficiency washing machine?

Cleaning frequency depends on how often you use the washer, the amount of soil in your loads, and whether your home has hard water.

A simple maintenance schedule can prevent most common problems before they start.

  • Monthly: run a tub clean cycle and wipe the gasket and door.
  • Every 1 to 2 months: clean the detergent drawer and inspect the drain filter.
  • Weekly: leave the door or lid open after laundry to let moisture escape.
  • After heavy use: check for residue, lint, or odor more often.

Homes with hard water, pets, or frequent cold-water washing may need more frequent cleaning because minerals and lint accumulate faster.

Common mistakes to avoid

Many washer problems come from well-intentioned cleaning habits that are too aggressive or inconsistent.

Avoid these mistakes to protect your HE appliance.

  • Using too much detergent: HE washers need low-sudsing detergent and smaller doses.
  • Leaving the door closed: trapped moisture encourages mildew.
  • Skipping the gasket: hidden moisture can create persistent odors.
  • Using abrasive pads: they can scratch finishes and seals.
  • Mixing cleaning chemicals: never combine bleach and vinegar.

If odors return quickly after cleaning, the issue may be a clogged drain hose, poor ventilation, or excess detergent usage rather than the drum itself.

When to use a commercial washer cleaner

Commercial washer cleaning tablets or liquids can be helpful when you need a deeper clean or want a low-effort maintenance option.

They are especially useful for removing odor-causing residue from hidden areas inside the machine.

Choose a product labeled for high efficiency washers and follow the package directions carefully.

Some products work best in a hot-water maintenance cycle, while others are designed for cold or warm settings.

If your washer has recurring mildew or heavy buildup, a commercial cleaner can be part of a broader routine that includes gasket cleaning, filter maintenance, and better drying habits.

Signs your HE washer needs immediate cleaning

A few warning signs indicate that cleaning is overdue.

Paying attention early can prevent laundry problems from becoming repair issues.

  • Musty or sour odors from the drum or door
  • Visible soap film on the tub or gasket
  • Wet lint or debris inside the seal
  • Slow draining or standing water
  • Clothes coming out with residue or an unusual smell

When these symptoms appear together, start with the drum, gasket, dispenser, and filter.

Those areas solve most odor and residue complaints in HE machines.

Maintenance habits that keep the washer cleaner longer

Good habits reduce the need for deep cleaning and help your washer stay fresh between service intervals.

Small changes in routine can make a noticeable difference.

  • Use only HE-labeled detergent and measure it accurately.
  • Remove wet laundry promptly after the cycle ends.
  • Air out the washer by leaving the door or lid open.
  • Wipe spills and splashes as soon as you notice them.
  • Run occasional hot-water maintenance cycles if the manual allows it.

These habits matter because the best way to clean a high efficiency washing machine is not only to scrub it when it smells, but to prevent buildup from forming in the first place.