10 Best Compact Upflush Toilets for Basement Bathrooms in 2026

Compact upflush toilets are a practical solution when traditional gravity plumbing is difficult or expensive to install. They’re especially useful for basements, additions, garages, and other tight spaces where routing a standard drain is a challenge.

This roundup focuses on space-saving models that balance flushing power, pump capacity, inlet options, and installation flexibility so you can choose a setup that fits your bathroom layout.

Best 10 Compact Upflush Toilets Picks for 2026

Best for Basement Installations

Simple Project 4-Inlet Macerating Toilet

Simple Project 4-Inlet Macerating Toilet
  • 4 inlets for toilet, sink, or shower tie-ins
  • Quiet 500W pump lifts waste up to 23 ft
  • 1.6 GPF flush with soft-close seat

Best For: Basement bathrooms and compact spaces that need a flexible, quieter upflush system.

Best for Small Spaces

DeerValley Compact One-Piece Toilet

DeerValley Compact One-Piece Toilet
  • Space-saving 24.5-inch length for tight bathrooms
  • 1.1/1.6 GPF dual flush for better water efficiency
  • Skirted one-piece design with soft-close seat

Best For: Small bathrooms and powder rooms that need a compact, easy-clean toilet.

Best for Multi-Room Basement Builds

SUPERFLO 1000W Macerating Toilet System

SUPERFLO 1000W Macerating Toilet System
  • 1000W macerator for strong waste pumping
  • Four inlets for toilet, sink, shower, or washer
  • DIY-friendly setup for basements and garages

Best For: Homeowners adding a full bathroom in a basement, garage, attic, or other space without direct sewer access.

Best for High-Lift Basement Installs

WinZo WZ5011-P Macerating Toilet

WinZo WZ5011-P Macerating Toilet
  • 500W pump lifts waste up to 23 feet.
  • Four inlets support multiple fixtures.
  • One-piece toilet with dual flush and soft-close seat.

Best For: Basement and below-grade bathrooms needing a powerful multi-fixture upflush system.

Best for Long-Distance Pumping

Simple Project 600W Macerating Toilet System

Simple Project 600W Macerating Toilet System
  • 600W pump reaches 295 ft horizontally and 30 ft vertically
  • Three inlets let you add a sink, shower, or laundry line
  • Quiet 45 dB operation with stainless steel grinding blades

Best For: Basement and remodel projects that need a compact upflush toilet with multiple fixture hookups and long pump reach.

Best for High-Lift Installations

36ft Upflush Macerating Toilet System

36ft Upflush Macerating Toilet System
  • 800W copper motor for reliable grinding and pumping
  • 36 ft vertical lift and 360 ft horizontal discharge
  • Full-skirted one-piece toilet with dual-flush efficiency

Best For: Homeowners or contractors needing a compact upflush toilet with strong lift and flexible routing.

Best for Full-Bath Basement Installations

SUPERFLO 750W Macerating Toilet System

SUPERFLO 750W Macerating Toilet System
  • 750W macerator for strong, fast waste removal
  • 4 inlets support toilet, sink, shower, and more
  • Lifts waste 36 ft up or 360 ft out

Best For: Basement bathrooms, garages, and other below-sewer spaces needing a full bathroom setup.

Best for Basement Add-Ons

Simple Project One Piece Macerating Toilet

Simple Project One Piece Macerating Toilet
  • 600W pump supports uphill waste removal
  • 3 inlets for sink and shower hookups
  • Compact one-piece design suits basement layouts

Best For: Basement remodelers who want a compact toilet that can handle extra bathroom fixtures.

Best Heavy-Duty Pick

SUPERFLO 600W Macerating Toilet System

SUPERFLO 600W Macerating Toilet System
  • 600W macerator pump for below-grade waste removal
  • Three inlets support toilet plus sink, shower, or laundry
  • One-piece, space-saving design for basement bathrooms

Best For: Basement and retrofit bathrooms that need a compact multi-fixture upflush solution.

Best for Multi-Drain Basement Installations

SUPERFLO 600W Macerating Toilet System

SUPERFLO 600W Macerating Toilet System
  • 600W macerating pump for dependable waste handling
  • Three inlets for toilet, sink, and shower hookups
  • Compact one-piece design with odor control

Best For: Basement bathrooms that need a compact toilet system with multiple drain connections.

Best for Basement Installations – Simple Project 4-Inlet Macerating Toilet

If you need one of the more adaptable compact upflush toilets for a basement bath or multi-fixture setup, this Simple Project system is built around flexibility. The 4-inlet design, 1.6 GPF flush, and 500W macerator pump make it a practical pick when you want to connect a toilet with nearby sink or shower fixtures without a major remodel.

Best For: Basement bathrooms, additions, and compact spaces that need a quiet macerating toilet with multi-inlet support.

Pros:

  • Four inlets support more plumbing layouts, including sink and shower connections
  • Quiet 500W pump is rated for up to 23 ft of lift for flexible installation
  • 1.6 GPF flush and soft-close seat improve everyday usability
  • Ceramic construction adds a sturdier, more finished feel than many basic units

Cons:

  • Installation still requires careful sizing and planning around the wall distance
  • Higher-spec setup may be more than needed for a simple single-toilet retrofit
  • As with most upflush systems, performance depends on proper venting and setup

Overall, this model stands out for buyers who want compact upflush toilets that can handle more than just a toilet connection. If your basement project needs a quieter pump and extra inlet flexibility, it is a strong all-around option.

Best for Small Spaces – DeerValley Compact One-Piece Toilet

If you need one of the more space-conscious options among compact upflush toilets, this DeerValley one-piece model is built around a small footprint and easy-clean design. The round bowl, skirted base, and 12-inch rough-in make it a practical fit for tight bathroom layouts where every inch matters.

Best For: Small bathrooms, powder rooms, and remodels where you want a compact toilet with a quiet seat and simpler cleaning.

Pros:

  • Compact dimensions help it fit tight spaces without feeling cramped
  • Dual-flush system balances water savings with solid flushing performance
  • Fully skirted one-piece design is easier to wipe down and maintain
  • Soft-close seat reduces noise and prevents slamming

Cons:

  • Round bowl may feel smaller than an elongated model for some users
  • Installation is easier than many toilets, but still requires basic plumbing know-how
  • Not the best pick if you want a larger comfort-height style

For shoppers comparing compact upflush toilets, this model stands out more for its small footprint and low-maintenance one-piece build than for any specialized pumping setup. It makes the most sense when space-saving, quieter operation, and easier cleaning are the top priorities.

Best for Multi-Room Basement Builds – SUPERFLO 1000W Macerating Toilet System

If you need one of the more flexible compact upflush toilets for a basement, garage, or attic bathroom, the SUPERFLO 1000W system is built to handle a full setup without major plumbing changes. Its four inlets make it easier to connect multiple fixtures, while the upflush design helps move waste to the sewer line from below-grade spaces.

Best For: DIYers and homeowners adding a complete bathroom in a basement, garage, attic, or other area without direct sewer access.

Pros:

  • 1000W motor provides strong pumping power for waste removal
  • Four inlets support a toilet, sink, shower, or washer connection
  • Compact upflush setup is well suited to tight spaces and retrofits
  • Noise-reduction design aims for quieter everyday operation

Cons:

  • Installation may still be challenging for first-time DIYers
  • Works best when you have a clear plan for plumbing layout
  • Bulkier than a simple toilet-only solution

Overall, this is a practical choice if you want compact upflush toilets that can support more than just a toilet in one unit. It is especially appealing when you need a flexible, all-in-one macerating system for a finished basement or similar project.

Best for High-Lift Basement Installs – WinZo WZ5011-P Macerating Toilet

If you’re comparing compact upflush toilets for a basement or other below-grade space, the WinZo WZ5011-P is built for installations where traditional gravity plumbing isn’t practical. Its 500W macerator pump, rear outlet design, and dual-flush toilet make it a strong fit for adding a bathroom without breaking up the floor.

Best For: Basement bathrooms, remodels, and other spaces that need a powerful upflush system with multi-fixture flexibility.

Pros:

  • 500W macerator pump can lift waste up to 23 feet vertically.
  • Supports up to four inlet connections for toilet, sink, shower, or laundry use.
  • Dual flush setup helps reduce water use.
  • One-piece design with soft-close UF seat is easier to clean and maintain.

Cons:

  • Rear outlet only, so it won’t fit bottom-outlet plumbing setups.
  • Installation is more involved than a standard toilet.
  • May be more system than needed for simple single-fixture upgrades.

Overall, this WinZo model is a practical pick if you need one of the more capable compact upflush toilets for a basement project. The power, inlet flexibility, and water-saving flush options make it a solid choice for tougher installations.

Best for Long-Distance Pumping – Simple Project 600W Macerating Toilet System

If you need one of the more flexible compact upflush toilets for a basement, bath addition, or utility room, this Simple Project system stands out for its strong lift and long horizontal run. The 600W pump, three water inlets, and quieter operation make it a practical fit when you need to connect a toilet with a sink or shower without traditional drain access.

Best For: Basements and remodels that need a compact upflush toilet system with long pumping reach and multiple fixture connections.

Pros:

  • 600W macerator handles up to 295 feet horizontally and 30 feet vertically
  • Three water inlets support toilet, sink, shower, or laundry connections
  • Quiet 45 dB operation is more comfortable for everyday use
  • Stainless steel blades help break down waste efficiently

Cons:

  • May be more power than you need for a very simple single-fixture setup
  • Installation still requires proper planning for venting and drainage layout
  • Bulky compared with ultra-minimal toilet-only units

This is a strong pick if your project needs reach and flexibility rather than the smallest possible footprint. Among compact upflush toilets, it is especially appealing for remodels where multiple fixtures and a tougher pumping job are part of the plan.

Best for High-Lift Installations – 36ft Upflush Macerating Toilet System

If you need one of the more capable compact upflush toilets for a basement, RV, or remote bathroom, this 36ft macerating system stands out for its strong lift rating and flexible drain options. It is built to handle tougher runs while still keeping the footprint relatively simple for tighter installations.

Best For: Homeowners or contractors who need a compact upflush toilet system with strong vertical lift, flexible routing, and an easy-clean one-piece design.

Pros:

  • 800W copper motor with strong grinding and pumping performance
  • 36 ft vertical lift and 360 ft horizontal discharge for flexible placement
  • Full-skirted one-piece toilet is easier to clean than traditional designs
  • Dual-flush system helps reduce water use without sacrificing utility

Cons:

  • More power than many basic compact upflush toilets, so it may be overkill for simple installs
  • Requires proper planning for discharge routing and electrical setup
  • Installation may be more involved than a standard toilet replacement

Overall, this is a strong pick if your priority is pumping distance and adaptable layout rather than the smallest or simplest unit available. Among compact upflush toilets, it makes sense for buyers who need real installation flexibility and dependable lift performance.

Best for Full-Bath Basement Installations – SUPERFLO 750W Macerating Toilet System

If you need one of the more capable compact upflush toilets for adding a bathroom below grade, the SUPERFLO 750W system is built for bigger jobs. Its strong macerator pump, multiple water inlets, and long-distance lift make it a practical choice when you want to install a toilet, sink, and shower without major plumbing work.

Best For: Basement bathrooms, garages, cabins, and small spaces that need a full bathroom setup with dependable pumping power.

Pros:

  • 750W motor provides strong waste pumping for demanding installations
  • 4 water inlets support a toilet, sink, shower, and another fixture
  • Can pump up to 36 ft vertically and 360 ft horizontally
  • Easy to add a bathroom without breaking concrete or digging new drain lines

Cons:

  • More power than some small-scale users may actually need
  • Installation still requires planning around inlet and discharge routing
  • Best suited to spaces with a clear need for an upflush system

For buyers comparing compact upflush toilets, this SUPERFLO model stands out for turning difficult spaces into a functional full bath rather than just a basic toilet setup. It makes the most sense when you need lifting performance, flexibility, and room for multiple fixtures.

Best for Basement Add-Ons – Simple Project One Piece Macerating Toilet

If you need one of the more flexible compact upflush toilets for a basement bath, this Simple Project unit is built to move waste upward without invasive floor work. Its integrated 600W macerator pump and three inlets make it a practical choice when you want a toilet that can also support nearby sink or shower drainage.

Best For: Basement bathrooms, remodels, and DIY installs where you want a compact toilet with room for add-on plumbing.

Pros:

  • 600W macerator pump handles uphill discharge for basement installations
  • Three inlets add flexibility for connecting a sink or shower
  • One-piece, elongated design keeps the footprint clean and compact
  • Can reduce the need for costly excavation and floor-breaking plumbing

Cons:

  • Needs proper setup and routing to perform reliably
  • Not the quietest option compared with a standard gravity toilet

For buyers comparing compact upflush toilets, this model stands out more for versatility than minimalism. It makes the most sense when you need a space-saving toilet that can anchor a full basement bathroom with extra fixture connections.

Best Heavy-Duty Pick – SUPERFLO 600W Macerating Toilet System

If you need one of the more capable compact upflush toilets for a basement, garage, or retrofit bathroom, this SUPERFLO system stands out for its 600W macerator pump and three-inlet layout. It’s built to move waste upward without major excavation, while still leaving room to connect a sink, shower, or laundry drain.

Best For: Homeowners finishing a basement bathroom or adding a multi-fixture setup where gravity drainage isn’t available.

Pros:

  • 600W pump is designed for strong waste-handling performance in below-grade installs
  • Three inlets support a toilet plus sink, shower, bathtub, or laundry connection
  • One-piece design saves space and fits well in compact bathroom layouts
  • Activated carbon filtration helps control odors during operation

Cons:

  • Installation is more specialized than a standard toilet and requires careful sealing
  • Not a true bolted floor-mount setup, which may be unfamiliar to some buyers
  • Best suited to retrofit projects, not simple like-for-like toilet replacements

For buyers comparing compact upflush toilets, this model is especially appealing when you want to build out a fuller basement bath without breaking concrete. Its mix of pumping power, multiple inlets, and space-saving form gives it a practical edge for remodeling projects.

Best for Multi-Drain Basement Installations – SUPERFLO 600W Macerating Toilet System

If you need one of the more flexible compact upflush toilets for a basement remodel, this SUPERFLO system stands out for its 600W macerating pump and three-inlet setup. It is built to handle a toilet plus optional sink or shower connections, making it a practical choice when traditional gravity plumbing is not an option.

Best For: Basement bathrooms, retrofit projects, and small spaces that need a toilet with optional sink or shower drainage in one compact system.

Pros:

  • 600W pump provides strong macerating and rear-discharge performance.
  • Three inlets support toilet, sink, and shower or other fixture connections.
  • Compact one-piece design saves space and keeps the installation tidy.
  • Activated carbon deodorization helps reduce bathroom odors.

Cons:

  • Installation is more involved than a standard gravity-flush toilet.
  • Sealed floor-fitting setup may not suit every DIY skill level.
  • May be more system than needed for a simple toilet-only install.

Overall, this is a strong pick if you want compact upflush toilets with enough power and inlet flexibility for a fuller basement bath layout. The design is especially appealing for buyers who want a cleaner look and more installation options without sacrificing performance.

How We Picked the Best Compact Upflush Toilets

We focused on Compact Upflush Toilets that are designed for real-world remodels, not just spec-sheet strength. The best options in this category typically combine a small footprint, reliable macerator performance, and enough inlet or outlet flexibility to support common basement bathroom layouts.

We also prioritized models with practical installation features such as rear or top discharge options, multiple water inlets for adding a sink or shower, and motor ratings that suggest better handling of waste and vertical lift. Quiet operation, one-piece construction, and easier cleaning were additional advantages.

Quick Comparison: What Matters Most

When comparing models, start with the pump and plumbing layout. Higher-wattage units can offer more lifting power, but the right choice depends on how far and how high the waste needs to travel. For smaller bathrooms, a lower-watt model may be enough if the lift distance is modest.

Next, compare inlet count and fixture compatibility. Some Compact Upflush Toilets support only the toilet, while others can connect to a sink or shower, which makes them better suited for full basement baths. Tank style, rough-in dimensions, and overall footprint should also match the available space.

Key Buying Factors for Compact Upflush Toilets

Pump Power and Lift Capacity

Look for a macerator pump strong enough for your vertical lift and horizontal run. If the unit will move waste a long distance, choose a model with more power and a reputation for steady operation under load.

Inlet and Outlet Configuration

Multiple inlets can simplify a full bathroom install, while flexible drain port placement can make it easier to work around joists, walls, and existing plumbing. This is one of the biggest advantages of Compact Upflush Toilets in basement projects.

Size, Shape, and Comfort

Compact does not have to mean cramped. Check one-piece vs. separate-tank designs, bowl shape, and rough-in requirements to make sure the toilet fits both the room and the user.

Noise, Maintenance, and Cleaning

A quieter motor is more pleasant in finished living spaces. One-piece and skirted designs can also reduce dust traps and make routine cleaning simpler.

Who Should Buy Which Compact Upflush Toilets?

If you’re building a basement bathroom with multiple fixtures, choose a model with extra inlets and stronger pumping capacity. If your priority is a tight footprint in a small powder room, a simpler compact unit may be the better fit. Homeowners who want the easiest cleaning and most polished look should lean toward one-piece or skirted designs, while DIYers should favor models with straightforward access and installation-friendly drain routing.

In short, the best Compact Upflush Toilets are the ones that match your plumbing path, space constraints, and fixture plan—not just the highest wattage on the box.